The MAX3420E contains the digital logic and analog circuitry necessary to implement a full-speed USB peripheral compliant to USB specification rev 2.0. A built-in full-speed transceiver features ±15kV ...

In embedded systems, SPI (Serial Peripheral Interface) and I2C (Inter-Integrated Circuit) protocols are both used for communication between microcontrollers and other integrated circuits. Which of ...

SPI (Serial Peripheral Interface) Flash is the serial synchronous communication protocol developed by SPI Block Guide V04.01. SPI Flash VIP can be use ...

The Serial Peripheral Interface (SPI) interface was initially standardized by Motorola in 1979 for short-distance communication in embedded systems. In its most common four-wire configuration, ...

In the last video I demonstrated a Universal Active Filter that I could adjust with a dual-gang potentiometer, here I replace the potentiometer with a processor controlled solid-state potentiometer.

The tactile device is thin, flexible, and has 25 stimulation generating points within a 2 cm × 2 cm area. To achieve wearable, to install the driving circuit close to the device, we use high voltage ...

More often than not, an IoT master device uses the SPI (serial peripheral interface) and I 2 C (inter-integrated circuit) protocols to exchange data with EEPROMs or sensors that are operating in slave ...

Local Interconnect Network (LIN) automotive bus systems are mainly placed in the body domain and we experience a constantly increasing number of nodes in the car. This article introduces the concept ...

When looking at protocol information on a bus, an oscilloscope may not be the first instrument to come to mind�until now. As most engineers know, digital oscilloscopes are an indispensable ...

Check out LIN and I2C for low speed networking needs. They are often better alternatives than SPI or CAN for many applications. The serial peripheral interface (SPI) and universal asynchronous ...